Certificate 2 Telecommunications Cabling ICT20310
(Government approved Traineeship's)
Online Course Content Information

Trainer Locations
Darwin, Brisbane, Sydney, Melbourne, Adelaide, Darwin, Perth, Cairns, Townsville, Mackay, Rockhampton, Bundaberg, Hervey Bay, Sunshine Coast, Gold Coast, Toowoomba.
  • This training leads to a Nationally recognised qualification "Certificate 2 in Telecommunications Cabling".
  • You then use that Certificate to apply for the ACMA Open Cabling Registration.
  • Cert 2 costs $480 online theory cost then complete our Hands on Day $200 (Total $680* incl GST).
    (* see Hands on Day conditions for Trainees or Experienced Cablers below)

Online Training 

There are no pre-requisite requirements for this qualification. Here are the units of competency you will study online.

Core units
  • BSBSUS201A Participate in environmentally sustainable work practices
  • ICTOHS2170A Follow occupational health and safety and environmental policy and procedures
  • ICTTEN2007A Use electrical skills in telecommunications work
  • ICTTEN2105A Install and test an internet protocol device in convergence networks
  • ICTTEN2140A Use hand and power tools
Group A – Workplace elective units
  • ICTWOR2141A Work effectively in a telecommunications technology team
Group B – General elective units
  • ICTCBL2005A Install customer cable support systems
  • ICTCBL2006A Place and secure customer cable
  • ICTCBL2008A Terminate metallic conductor customer cable
  • ICTCBL2012A Install functional and protective telecommunications earthing system
  • ICTCBL2017A Alter services to existing cable system
  • ICTCMP2022A Organise/monitor cabling to ensure compliance with regulatory/ industry standards
The elements within the Units of competency above also cover the ACMA competencies below:
  • ICTCBL2136A Install, maintain and modify customer premises communications cabling: ACMA Restricted
  • ICTCBL2137A Install, maintain and modify customer premises communications cabling: ACMA Open Rule
The ACMA Registrars will accept this Certificate as evidence toward issuing an Open Cabler Registration.
Note: The ACMA requirement for ACDC Theory is completed as part of the unit ICTTEN2007A.

Competency Details
For details on competencies starting with ICTCBLxxxxX click here. Scroll through.
For details on competencies starting with ICTTENxxxxX click here. Scroll through.

For details on competency BSBSUS201A click here. Go to Page 93.
For details on competency ICTOHS2170A click here. Go to Page 18.
For details on competency ICTCMP2022A click here. Go to Page 1.
For details on competency ICTWOR2141A click here. Go to Page 1.

Hands on Training Projects
The costs for hands on training is $200 per day, normally paid on the day to CCC Trainers based around Australia.

  • Experienced Cablers will only require a single hands on day thus the cost will be $200.
  • Trainees and inexperienced cablers may need additional face to face hands on training ($200/day) or
  • Trainees and inexperienced cablers may gain the necessary experience in the field with their Employer and
  • Trainees and inexperienced cablers will still need to complete a minimum single day training with CCC Trainers costing $200.

Hands on Assignments and Projects
Assignments may be wavered for experienced cablers who can show evidence they have the necessary skills and knowledge (RPL).
Trainees and inexperienced cablers must complete all assignments and purchase the necessary kits and test equipment needed.

  • The costs for electronic kits used in ICTTEN2007A is less than $50 per student.
  • Students are required to purchase an inexpensive Multimeter.($30)
  • Students will incur costs for consumable items used on the Hand and Power Tools training day.
  • Students are required to purchase a basic tools, IDC tool, sidecutters, screwdrivers, pliers, battery drill and bits etc.
  • Students are required to have a wireless Laptop for projects in ICTTEN2105A.

Call Trevor for a free quote or free training pathway assessment. 07 41596950

Training Process

Completing my training, what do I do?

Completing the steps below in these points are required to finish your training then you need to then submit your final evidence to the tutor.

Complete and pass all theory modules requested by the tutor?     

Complete your hands on training or completed RPL/RCC?             

The completion of competency based training meets minimum cabling experience requirements by the ACMA     

You must now prepare all your paperwork to return to the tutor for final assessment. Please follow the steps below.

Non Trades
Person Pathway		 Trades Person
Pathway		 Recognition
of Prior Learning
Pathway
  1. You should have passed your online final Assessments and Assignments.
  1. You should have passed your online final Assessments and Assignments as required by the Tutor.
  1. You should have passed your Assessments for any modules as required by RPL assessment.
  1. All students complete Step 2
  • You are required to give the tutor a written resume or recorded telephone interview. Evidence to support your experience is required. Please download the template to see what is required. A template in WORD (docx) is available to complete by clicking here:

    Student Cabling Resume.
  1. All students complete Step 3
If you have any formal qualifications, Technical Certificates, Electrical Licence, First Aid Certificate etc, you need to photocopy or scan these documents and should be made ready to post or email to the tutor. (never send originals to the tutor)
  1. Hands on Training Evidence
You will have attended a hands on training course. The instructor/mentor gave you an observation checklist that was signed by you both. The original document needs to be found and made ready for posting or emailing to the tutor. If you were requested to keep a workbook of field experience you must get that original book ready for posting to the tutor.
  1. Hands on Training Evidence
You will have attended a hands on training course. The instructor/mentor gave you an observation checklist that was signed by you both. The original document needs to be found and made ready for posting or emailing to the tutor.
  1. Hands on Training Evidence
You may have completed this training day or you may be claiming RPL/RCC. If you did the hands on day you need to get your observation checklist ready for posting to the tutor. If you are applying for RPL you need to provide written evidence/qualifications/past experience ready for posting to the tutor.
  1. Post or email your evidence to the Tutor
CCC
PO BOX 1972
Bundaberg
Qld 4670

What happens next?
When your paperwork arrives, the tutor will do the following:
  • check you have passed all online final Assessments
  • check you have passed all online final Assignments
  • check you have completed your hands on day
  • check any RPL evidence provided is correct
  • check any certified copies of qualifications
If all the requirements are met, the tutor will email your Certificate/Attainment Statement to you. You may request a printed copy also.

What happens next?
When you receive your Certificates/Attainment Statements from CCC, you need to get an "Open Cabler Registration Form" from one of 5 ACMA Registrars. The 5 registrars are listed below. Click the registrar of your choice and download their registration form. Follow these final steps.
  • download and print the form
  • fill in the form for OPEN registration with payment option
  • print a copy of the Certificate
  • post the form and certificate to the registrar
  • 2 weeks later you will have a ACMA Open Registration
  • FINISHED
  • Titab Australia CRS - Telecommunications Industry Training Advisory Board
  • BICSI - Building Industry Consultants
  • ASIAL - Security Industry
  • FPAA - Fire Protection Industry
  • ACRS - Electrical Industry

I need help filling in the application form?
You are applying for an Open Cabling Registration, no Endorsements at this time
The Training Organisation is Conquest Communications RTO 30268

If you need help call Trevor on 07 41596950

What if my Certificate gets lost in the Mail?
It does not happen often but it can happen.
We will need you to wait a couple of weeks first.
This gives any miss-direction of your mail time to correct itself and get to you.
If you have not received your mail after 2 weeks we will issue another set for free.
You must confirm your correct address by email to Trevor first.

Did you like our Training?
If you did please tell your friends and colleagues.
We mainly market by word of mouth referrals.

If you did not like something please email Trevor
We are happy to take feedback and improve our services

Top